Author Topic: "Prinz Eugene"  (Read 2484 times)

OLVAR

  • Guest
"Prinz Eugene"
« on: November 17, 2017, 08:32:52 AM »
Ahoy comrades of fresh water,

this is my construction of the "Prinz Eugen" by REVELL
It is 29.5 cm long, has the SKILL 3 and is covered by me with various Corel Paint X3 stuff.

First, I work on the underwater ship so that the grades disappear.
Then the screw shafts come into contact with adhesive:
« Last Edit: November 17, 2017, 08:37:54 AM by OLVAR »

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #1 on: November 17, 2017, 08:36:46 AM »
I will paint the underwater ship with oil paint.
The ship is sanded with the finest sandpaper, cleaned and then painted with red paint.
I let it dry then.
With a soft bristle brush, I then easily wipe over the part.
Then the brushstrokes disappear and the underwater ship looks like brusht.
Again the disadvantage, the part must now dry at least a week that it is oil paint

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #2 on: November 17, 2017, 08:42:08 AM »
Not drying in quick time has another advantage, I can take care of the textures.
I take the measurements off the deck, photograph the deck and adjust it in the program.
Draw everything off and my cover template is ready.

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #3 on: November 17, 2017, 08:43:51 AM »
The textures

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #4 on: November 17, 2017, 08:45:47 AM »
The deck I sprayed gray.
After drying, I brushed an oil mixture of black and turpentine.
Then the drawn deck was printed out, cut out and glued on:

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #5 on: November 17, 2017, 08:48:17 AM »
Since the superstructures on the side walls are smooth I've just drawn something to stick.

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #6 on: November 17, 2017, 08:50:00 AM »
First the sidewalls without textures and then with textures:

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #7 on: November 17, 2017, 08:51:28 AM »
New pictures

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #8 on: November 17, 2017, 08:56:10 AM »
The underwater hull got a dark wash and some scuff marks.

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #9 on: November 17, 2017, 08:57:58 AM »
The main tower:

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #10 on: November 17, 2017, 09:00:14 AM »
With my prince, the right wing of the on-board aircraft had not been cast with.
What would a model maker do there?
Exactly, do it yourself.
In this case, with paper (would have been funny even if I had taken something else  ;D)

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #11 on: November 17, 2017, 09:02:50 AM »
Various parts for the ship.
Do not ask me what that is all:

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #12 on: November 17, 2017, 09:05:11 AM »
Before the end comes a look at the turrets.
Will only show what detailing there is on a scale of 1: 720 and the last parts come on board:

OLVAR

  • Guest
Re: "Prinz Eugene"
« Reply #13 on: November 17, 2017, 09:07:00 AM »
The end is here.
I drew a name tag for the ship:

zak

  • Hero Member
  • *****
  • Posts: 5320
  • Grumpy by name and nature
    • View Profile
Re: "Prinz Eugene"
« Reply #14 on: November 17, 2017, 10:51:52 AM »
Looking good.
Grumpy by name and nature