Medieval Town Square with a Sci-Fi Twist

[MSea]

Trying to sort out what to do next playday       
Decided to make a town square with buildings and people in 28mm scale.
Have done some research and started to decide with quick card models what size the buildings will be and how to construct them.

[MSea]

Thick card and corner balsa sections added to the inner corners - now should I do plaster of paris or individual card sections to make the stone blocks on the model      

[zak]

Thick card and corner balsa sections added to the inner corners - now should I do plaster of paris or individual card sections to make the stone blocks on the model      

I generally use a layer of DAS modelling clay and carve it out.

[chriswil42]

This is going to be interesting.

[Bigkev]

Another wierd and wonderful creation in the making from the mind of Martin, a bit of a scary prospect......

[cph64]

Is that Martin or the project?

[MSea]

Just you lot wait you are all on the list     

[MSea]

Lower section now made in thick card and varnished, now to add a coat of plaster.
Then its onto the tall house in thin card to check the size ( must remember to put the tiles on the correct way          ) that lot should keep me going for playday 34.

[MSea]

Coat of plaster added, now to let it dry and then see if it needs another coat or I can start marking the stones onto the plaster     

[MSea]

Quick card model of next building made - needs the section above the entrance tower smaller and roof larger to add the support sections. Thats the advantage of the quick card model, you can see all the problems before you make it in good material.

[cph64]

It reminds me of the damaged bridge at Remagen. Should be an intereting build.

[MSea]

Work done on the buildings during playday 34

[cph64]

Well this looks interesting.

[MSea]

Now thats not a word used about my models very often       

[chriswil42]

Just "interesting!"