Bridlington & Wolds Scale Model Club Forum

Models => Modelling Projects => Topic started by: Haddock on January 05, 2021, 04:02:57 PM

Title: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Haddock on January 05, 2021, 04:02:57 PM
                               Not another submarine I hear you say, well it's MSea's fault, he put me up to it!!
                    Although I'm not very fond of subs, one or three wouldn't go amiss in a collection
of warships.
                          Not many parts which is quite therapeutic, makes for a quick build. There are no locating pins at all but it's really not a problem, the parts are quite nicely moulded. The instructions are a bit vague
so care is needed so you're not caught with your pants down.
                                         The pictures speak for themselves.
                  Ready to slosh some paint on. You're offered two schemes, neither of which look very pretty, I may have to use some artistic licence.
Haddock.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: zak on January 05, 2021, 04:15:55 PM
Well, what a turn up, after all you have intimated in the past.
Dive, Dive, Dive
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Wizzel on January 05, 2021, 08:38:40 PM
After getting that weird Sam 23 aircraft and looking at what else they made, I had my eye on those Mikr Mir subs thinking I may try one or two.  That's decided me, I'll give it a go...
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Haddock on January 06, 2021, 09:20:46 AM
Well, what a turn up, after all you have intimated in the past.
Dive, Dive, Dive
Just proves what a nice chap I am.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: zak on January 06, 2021, 09:33:06 AM
Well, what a turn up, after all you have intimated in the past.
Dive, Dive, Dive
Just proves what a nice chap I am.
I have a reply, but fear that I would be moderated!
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Bigkev on January 06, 2021, 10:10:21 AM
Hi Wizzel,
You know me so well......
Bigkev
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: MSea on January 06, 2021, 10:43:27 AM
                               Not another submarine I hear you say, well it's MSea's fault, he put me up to it!!
   
Haddock.

After all your comments to Haddock,at least you didn't notice WHO HE BLAMED FOR IT - YoHoHo
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: chriswil42 on January 06, 2021, 12:38:09 PM
Looks like it's got a gun on top too.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: chriswil42 on January 06, 2021, 12:39:27 PM
                               Not another submarine I hear you say, well it's MSea's fault, he put me up to it!!
   
Haddock.

After all your comments to Haddock,at least you didn't notice WHO HE BLAMED FOR IT - YoHoHo
I'd blame Martin too.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: zak on January 06, 2021, 01:18:20 PM
                               Not another submarine I hear you say, well it's MSea's fault, he put me up to it!!
   
Haddock.

After all your comments to Haddock,at least you didn't notice WHO HE BLAMED FOR IT - YoHoHo
I'd blame Martin too.
I always blame Martin.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: MSea on January 06, 2021, 03:08:07 PM
Glad to be of some use - YoHoHo
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: councilman on January 06, 2021, 06:38:31 PM
I see this boat had a 305mm gun mounted on it. I bet that thing going off cleared the crews ears out.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Bigkev on January 06, 2021, 08:00:05 PM
I see this boat had a 305mm gun mounted on it. I bet that thing going off cleared the crews ears out.

It might of cleared the crew members ears when fired, but about the recipient's?. Bet something else happened when they knew what was heading towards them.......
Bigkev
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: kiwichappers on January 07, 2021, 10:38:33 AM
It was certainly an interesting time for submarine design. Can't help thinking firing a broadside would have been fraught, if not terminal with a gun of that calibre.

I would love to see these models when finished. One can but dream for the moment!
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: MSea on January 07, 2021, 12:27:48 PM
From what I can remember reading about the M1 - they did not fire broadsides only ahead shots.
The sub was lowered in the water with just the gun barrel above water and they used the periscope to line up the barrel on the target and then fired the gun. Only one shot as they had to surface to reload the gun
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: chriswil42 on January 07, 2021, 01:19:41 PM
From what I can remember reading about the M1 - they did not fire broadsides only ahead shots.
The sub was lowered in the water with just the gun barrel above water and they used the periscope to line up the barrel on the target and then fired the gun. Only one shot as they had to surface to reload the gun
An interesting procedure.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Haddock on January 07, 2021, 03:57:10 PM
MSea is a mine of information. Just to add a little to it.
The idea was to "sneak up" on the enemy, partly surface then fire at short range
and submerge quick.
It was never done in anger and probably wouldn't have worked The only thing
these boats were any good at was killing the crew one way or another.
Here's a couple of pics, just for interest. The first is a model in the science museum.
Haddock.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: chriswil42 on January 07, 2021, 04:32:45 PM
Very interesting Tony. I did'nt know that these types and sizes of guns were mounted on subs. Amazing the ideas people come up with. Was it a british idea?
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: Haddock on January 10, 2021, 04:16:23 PM
British idea, probably someone with a degree in town and country planning!!

            Might call it complete although a bit of a dirty up wouldn't come amiss.
There are no railings in the kit and I don't have much suitable in the spares box
other than those already added so it will have to stay as it is unless I can unearth
some more.
             I think railings around the weather deck would probably be taken down at sea
so I'm happy to leave 'em off.
Haddock.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: zak on January 10, 2021, 05:00:34 PM
Very good, looks like the wavy navy.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: cph64 on January 10, 2021, 05:02:03 PM
The docked photo reminds me of Dumbo. It was probably a 'dumb beau' who thought this was a good idea!!!
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: chriswil42 on January 11, 2021, 12:43:40 PM
Looking good Tony.
Title: Re: HMS M1 SUBMARINE IN 1:350 by MICRO-MIR
Post by: councilman on January 17, 2021, 02:13:16 PM
Nice work.
More Submarines please.