3526
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 31, 2015, 03:16:37 PM »I'll look like, and be the size of Tom Cruise when I've finished!
Bigkev
News:
Welcome to the new Bridlington and Wolds Scale Model Club forum
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
I'll look like, and be the size of Tom Cruise when I've finished!
Bigkev
3527
General Discussion / Re: Sad News Geoff Proudfoot
« on: January 31, 2015, 03:14:03 PM »
Gentlemen,
I am still awaiting news on Geoff's funeral arrangements. I was expecting to get them Friday 30th January, but still awaiting info.
Col. Tony is going to get in contact with Geoff's family as soon as he can, but to date there has been no one available to answer his calls.
As soon as I get any further update I shall post on here as well as contacting those of you who can by email.
Bigkev
I am still awaiting news on Geoff's funeral arrangements. I was expecting to get them Friday 30th January, but still awaiting info.
Col. Tony is going to get in contact with Geoff's family as soon as he can, but to date there has been no one available to answer his calls.
As soon as I get any further update I shall post on here as well as contacting those of you who can by email.
Bigkev
3528
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 31, 2015, 02:32:56 PM »
Well a little more progress.
I have rubbed down the green stuff on top of the fuselage and it is looking good now, no sink marks apparent.
The windows have been rubbed down, you can see before and after, and if you look closely you will see the first four windows on the port side are slightly darker where I have put some green stuff on and rubbed that down to fill remaining depressions.
You will also notice that I have refilled all the windows in White Stuff filler again. This should be enough to make them good enough. It only takes 30mins to dry so I'm writing this whilst it goes off.
The nose undercarriage doors ( main ones are normally closed at all times unless gear is retracting or coming down or for servicing) have been glued in place and some small 'levelness' has been dealt with by applying filler to the affected areas. I have masked the outside of the doors where I do not want filler to go.
Rub down here I come!
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
I have rubbed down the green stuff on top of the fuselage and it is looking good now, no sink marks apparent.
The windows have been rubbed down, you can see before and after, and if you look closely you will see the first four windows on the port side are slightly darker where I have put some green stuff on and rubbed that down to fill remaining depressions.
You will also notice that I have refilled all the windows in White Stuff filler again. This should be enough to make them good enough. It only takes 30mins to dry so I'm writing this whilst it goes off.
The nose undercarriage doors ( main ones are normally closed at all times unless gear is retracting or coming down or for servicing) have been glued in place and some small 'levelness' has been dealt with by applying filler to the affected areas. I have masked the outside of the doors where I do not want filler to go.
Rub down here I come!
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
3529
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 31, 2015, 02:18:48 PM »
Hi Kiteman,
Cheers for that.
I hope my builds give you the confidence to try some of the things that work for me. Like yourself you pick up lots of tips just by talking and watching others.
I am still learning things too, etch brass is my 'bogey' I need to overcome.
Bigkev
Cheers for that.
I hope my builds give you the confidence to try some of the things that work for me. Like yourself you pick up lots of tips just by talking and watching others.
I am still learning things too, etch brass is my 'bogey' I need to overcome.
Bigkev
3530
Modelling Projects / Re: Grumman Avenger 1:48
« on: January 31, 2015, 02:14:39 PM »
Hi Kiteman,
Just goes to show that I didn't read your title build properly. You have called it an 'Avenger' it is actually a F6-F 'Hellcat.
The TBM-3 'Avenger' is a totally bigger aircraft altogether being a 3 seat torpedo/bomber/reconnaissance aircraft.
However the build is good, still want to get my Hellcat out of the loft!
Bigkev
Just goes to show that I didn't read your title build properly. You have called it an 'Avenger' it is actually a F6-F 'Hellcat.
The TBM-3 'Avenger' is a totally bigger aircraft altogether being a 3 seat torpedo/bomber/reconnaissance aircraft.
However the build is good, still want to get my Hellcat out of the loft!
Bigkev
3531
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 30, 2015, 08:42:02 PM »
Hi All,
Well now the nose and visor are dry, its time to fill any gaps present and smooth the surface. For the nose /visor I have used a mix of Talc and Thick superglue. This is applied over the gaps and then sprayed with Activator to make it go off.
Notice the windows have been filled with Mr Surfacer 500. This because the replacement decals will portray all the windows. Added with a small brush, once dry will be rubbed down and should reveal neatly filled windows, well that's the theory.
The wings only needed a little rubbing down in the main, any hairline gaps will be addressed once the wings are attached.
The eagle eyed will notice the wheel wells still need to be 'plumbed'. I will get this done a bit later on.
After an initial rub down of the nose area, a few slight depressions were noticed and I have added some 'Green Stuff' to redress these.
Once dry I will rub down again and inspect for flaws.
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
Well now the nose and visor are dry, its time to fill any gaps present and smooth the surface. For the nose /visor I have used a mix of Talc and Thick superglue. This is applied over the gaps and then sprayed with Activator to make it go off.
Notice the windows have been filled with Mr Surfacer 500. This because the replacement decals will portray all the windows. Added with a small brush, once dry will be rubbed down and should reveal neatly filled windows, well that's the theory.
The wings only needed a little rubbing down in the main, any hairline gaps will be addressed once the wings are attached.
The eagle eyed will notice the wheel wells still need to be 'plumbed'. I will get this done a bit later on.
After an initial rub down of the nose area, a few slight depressions were noticed and I have added some 'Green Stuff' to redress these.
Once dry I will rub down again and inspect for flaws.
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
3532
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 30, 2015, 08:29:27 PM »
Hi All,
Well we are back on the build again. I have glued the nose on and the visor, but as you can see they don't fit too well! Hmmmpf!
Also the wing is assembled minus the engines, this went pretty well despite being a tricky fit on the leading edge.
Filling next time.............................
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
Well we are back on the build again. I have glued the nose on and the visor, but as you can see they don't fit too well! Hmmmpf!
Also the wing is assembled minus the engines, this went pretty well despite being a tricky fit on the leading edge.
Filling next time.............................
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
3533
General Discussion / Re: Havixbeck Model Club
« on: January 30, 2015, 08:23:25 PM »
Hi Kiteman,
Well what a great bunch of modellers you lot are.
It is heartening to hear you have a junior modeller amongst your ranks. His model is as good as many a senior model makers, so give him my congratulations next time you see him.
The cars are as you say superb, I love that diorama/posing of the models. They always are more interesting than just 'stand alone models'. Bases or in your case 'Sea' brings the subject to life.
Well done to all at Havixbeck Model Club.
Bigkev
Well what a great bunch of modellers you lot are.
It is heartening to hear you have a junior modeller amongst your ranks. His model is as good as many a senior model makers, so give him my congratulations next time you see him.
The cars are as you say superb, I love that diorama/posing of the models. They always are more interesting than just 'stand alone models'. Bases or in your case 'Sea' brings the subject to life.
Well done to all at Havixbeck Model Club.
Bigkev
3534
Modelling Projects / Re: Grumman Avenger 1:48
« on: January 30, 2015, 06:05:52 PM »
Hi Kiteman,
Looking good, how do you build so quickly?
I've got one of these in my stash too so I'll be interested to see how it looks finished. Kit has great surface detail, but the cockpit needs a little work if I remember.
I'm still on with the Concorde, but will be doing some work later tonight. Perhaps I should dig my Hellcat out too...............................
Cheers,
Bigkev
Looking good, how do you build so quickly?
I've got one of these in my stash too so I'll be interested to see how it looks finished. Kit has great surface detail, but the cockpit needs a little work if I remember.
I'm still on with the Concorde, but will be doing some work later tonight. Perhaps I should dig my Hellcat out too...............................
Cheers,
Bigkev
3535
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 27, 2015, 06:16:49 PM »
Hi All,
Sorry not much progress made with Concorde for a while. Getting the 'Secretary Rites' completed for the newsletter, and dealings with Geoff's sad passing away has stifled progress.
Anyway on a positive note, the replacement decals from Draw Decals, from America have arrived today. They look very good as I expected. I cannot wait to start again, getting the kit together and as Haddock puts it, 'some paint sloshed on'.
Anyway some pictures of the Decals for now.
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
Sorry not much progress made with Concorde for a while. Getting the 'Secretary Rites' completed for the newsletter, and dealings with Geoff's sad passing away has stifled progress.
Anyway on a positive note, the replacement decals from Draw Decals, from America have arrived today. They look very good as I expected. I cannot wait to start again, getting the kit together and as Haddock puts it, 'some paint sloshed on'.
Anyway some pictures of the Decals for now.
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]
3536
General Discussion / Re: Croppers Model Shop
« on: January 26, 2015, 08:26:59 PM »
Ooooh Er...............
Bit of a late start isn't it, 10.30.
At least the streets will be 'aired' for you.
Bigkev
Will try to get in, if only to get some abuse.......!
Bit of a late start isn't it, 10.30.
At least the streets will be 'aired' for you.
Bigkev
Will try to get in, if only to get some abuse.......!
3537
General Discussion / Re: Sad News Geoff Proudfoot
« on: January 24, 2015, 04:51:21 PM »
Sadly it is one of those tasks I must carry out.
I have a card which I will be sending to Ruth and Dane on behalf of the club, expressing our condolences and sad loss of a great guy at this very sad time.
Bigkev
I have a card which I will be sending to Ruth and Dane on behalf of the club, expressing our condolences and sad loss of a great guy at this very sad time.
Bigkev
3538
Modelling Projects / Re: Building HMS Queen Elizabeth 1943
« on: January 24, 2015, 04:46:54 PM »
Thanks Haddock,
Your sense of loss and compassion is correct. Now is not the time for banter at a time of bereavement and loss.
Geoff will be sadly missed.
Bigkev
Your sense of loss and compassion is correct. Now is not the time for banter at a time of bereavement and loss.
Geoff will be sadly missed.
Bigkev
3539
General Discussion / Sad News Geoff Proudfoot
« on: January 23, 2015, 09:43:46 PM »
Dear All,
I am very sorry to pass on the sad news that our larger than life club member Geoff Proudfoot, sadly passed away earlier today in hospital after fighting hard in his battle with his Brain Tumour illness.
Geoff was a larger than life character who will be sorely missed by his family and friends. His quick and direct wit was a joy to behold. As his illness progressed Geoff became more unwell, to the point where he was unable to leave home easily.
Our thoughts and best wishes go to Ruth and Dane at this sad time.
if I get any details regarding Geoff's funeral arrangements I will post them here.
Bigkev
I am very sorry to pass on the sad news that our larger than life club member Geoff Proudfoot, sadly passed away earlier today in hospital after fighting hard in his battle with his Brain Tumour illness.
Geoff was a larger than life character who will be sorely missed by his family and friends. His quick and direct wit was a joy to behold. As his illness progressed Geoff became more unwell, to the point where he was unable to leave home easily.
Our thoughts and best wishes go to Ruth and Dane at this sad time.
if I get any details regarding Geoff's funeral arrangements I will post them here.
Bigkev
3540
Modelling Projects / Re: Bigkev's W.I.P No.6 Revell BAC/Aerospatiale Concorde 1/144th British Airways
« on: January 23, 2015, 08:56:15 AM »
Cheers Zak!
Hope to have it looking like a Concorde by end of next week!
Bigkev
Hope to have it looking like a Concorde by end of next week!
Bigkev