Hi all,
Little update.
Now have got cockpit inset trimmed and sanded to shape and reduced the gaps significantly. The Instrument panel assembled, and a brace fitted to support it as the attachment points are quite small. The nose has been filled with a mix of Plasticene, some lead .22 pellets, and some aquarium lead sheet under the cockpit. I checked that there is enough by doing the fingertip balance, by balancing the fuselage between the fingertips in line where the main wheels will be. In my case there is plenty, no tail sitting with this one.
The wheels, legs and cockpit parts all cleaned up, and then given some primer. Whilst primer out, the intakes got a blast, and generally all is good, just a faint seam to rectify during final assembly.
The jet pipe installed and primed. Some pictures follow:-
Thanks for looking Kevin.
