The white has been worked on but there will still be some more to do once everything is put together. The blue areas have been masked off where required and coats of Deep Sky Blue applied. Test fitting the wing to the fuselage showed that some carving and filing was required to get a good fit. Once happy with this all the minute actuators on the underside were added. The decals required cutting out individually as they're on a constant backing sheet and were teated with Set and Sol, followed by a coat of Klear tp protect them during future handling. As this is a 'one size fits all' fuselage not all the window outlines are present so care was taken to align then as best as. The red at the tips of the floats has been and masked so the walkways could be painted Tamiya Semi gloss Black.