Bridlington & Wolds Scale Model Club Forum
Models => Modelling Projects => Topic started by: zak on June 14, 2019, 05:22:18 PM
-
The Tirpitz has got the better of me at the moment.
I started this at our modelling day on Sunday.
After tidying and sorting out my modelling room I decided it was time to try modelling.
I have also catalogued my books and made a list of them and all the un made models that I have.
I may try to get rid of some of each at the club, so watch out.
I already have two of these tractors, one I scratch built and the other is the Resicast one, both have been featured on this site under my WW1 models. The photos have been deleted. That thread seems to have had 155986 hits - Wow!
The kit has a lot os flash, particularly on the individual track links.
-
Front wheel assemble.d
Chassis under assembly.
A lot of cleaning up was required and a lot of ejector pins and marks to deal with
-
Nothing like a good tidy up for getting you going again I say
-
I know you all think I am strange -- but cleaning up is the part of modelling I enjoy best.
-
I find things seem to go better if I'm working in a tip, so I only tidy up when I can't find anything.
Haddock.
-
More progress, chassis and engine.
-
More of the same.
-
What speed do you think you will get out of the engine - it looks like it will work to me ???????
-
Probably between 1 and 3 mph.
-
Oh well!
I'm glad it won't overtake me, I can just about manage 3.5 miles per hour....downhill!
Nice build, I'm sure it will be another DS masterpiece!
Cheers,
Bigkev
-
Back from the Isle of Wight.
This kit reminds me more and more of an older offering, considering it dates from 2018, there is a lot of holes to fill and things to fettle.
Here are the mud guard, they come as a flat piece that folds up into the required shape.
Quite a lot of filler is evident.
-
Back from the Isle of Wight.
This kit reminds me more and more of an older offering, considering it dates from 2018, there is a lot of holes to fill and things to fettle.
Here are the mud guard, they come as a flat piece that folds up into the required shape.
Quite a lot of filler is evident.
So lots of extra work to do - that means it will not be finished till about 3 o'clock today - hohoho
Hope you had a good time in the Isle of Wight - any good model shops ?????
-
Back from the Isle of Wight.
This kit reminds me more and more of an older offering, considering it dates from 2018, there is a lot of holes to fill and things to fettle.
Here are the mud guard, they come as a flat piece that folds up into the required shape.
Quite a lot of filler is evident.
So lots of extra work to do - that means it will not be finished till about 3 o'clock today - hohoho
Hope you had a good time in the Isle of Wight - any good model shops ?????
I didn't find any, but then I did not look very hard.
-
More assembly.
-
On the corrugated roof there are a nasty lot of sink holes, right down the middle.
This is the first application of filler.
-
After filling and undercoating I can still see the sink marks.
I will try some more sanding and filling.
Keep Calm and carry On.
-
Go and have a nice hot cup of Tea!
Those pesky sink marks are a bloomin' nightmare....
Bigkev
-
I am still battling with the roof, meanwhile, some parts have been undercoated and painted.
-
Looking good sink marks and all.
-
The sink marks are right down the length of the roof, still trying to disguise them.
-
The sink marks are right down the length of the roof, still trying to disguise them.
If you were a lazy modeller like me -- you could do it in a scrapyard or museum and show age and wear on it. That would sort out the problem of the sink marks, a good coat of rust covers lots of problems.
-
Well, almost there, still a few bits to do.
I can honestly say that I did not enjoy the build, bad fit and so on.
-
You may not have enjoyed the build but it looks great.
-
Ditto!
A great build, and great tenacity in completing a model that caused so many headaches!!
Hopefully your next project, will fill you with joy all the way.....
Cheers,
Bigkev