Hi All,
Well the gaps have been filled and the nose pitot attached. I used my superglue/talc mix for this and you can see if you look carefully the mix is semi opaque, however I did knock it off twice due to being clumsy, needed repairs on each occasion. Now it is secure and I'll be a bit more careful.
I found a small area on the underside of the wing leading edge that had not cleaned up properly due to the wing flexing. So I ran some thin superglue into the joint, applied accelerator, then my superglue talc mix as a filler. I have protected the surrounding areas with tape, and used a clamp to hold the wing in place whilst it all sets. I will tackle the rubbing down tonight.
I have plumbed in the wheel bays, with assorted strip and rod, just to make them look busy.
Next job is to attach the elevons fairings on the wing underside, paint up the inside of the nacelles, undercarriage legs, wheels.
Until next time.
Bigkev
[attachment deleted by admin]
[attachment deleted by admin]