Bridlington & Wolds Scale Model Club Forum

Models => Modelling Projects => Topic started by: Haddock on February 19, 2021, 10:11:30 AM

Title: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 19, 2021, 10:11:30 AM
Another unusual sub for the small collection of WW1 subs.
17 of these were built. The idea was to have a sub that could operate with the battle fleet. This meant that speed was important. They were powered by oil fired boilers driving two Parsons geared turbines, this gave a speed of 24 knots surfaced. Submerged speed was eight knots driven by electric motors which were charged by a diesel generator. Conditions below must have been horrendous.
At 340ft long and 1980 tons surfaced, these were big ships by sub standards, submerged the displacement rose to 2566 tons.
Safe diving depth was 200 ft, far less than the overall length.
Submerging could take up to 30 mins. Boilers had to be shut down, funnels lowered and the ship sealed against the ingress of the sea and the electric motors coaxed into life.
The design wasn't considered to be a success, they became known as the "Katastrophy class".
The original design was modified by the introduction of the bulbous bow (see pics) to improve the sea-keeping qualities but this didn't make a great deal of difference.
They were crewed by 59 officers and men.
Haddock.




 
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: MSea on February 19, 2021, 10:25:03 AM
Will enjoy this one - will it be at the "Battle of May Island"  ??????
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 19, 2021, 10:28:08 AM
Dunno yet, at the moment it's at the battle of Brookland road.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 19, 2021, 10:47:06 AM
And so to the build.
                             The parts count is quite low, numbered up to 25, there is a small etched fret. As the model is water-lined, some of the parts aren't used.
                Assembly of the plastic including water-lining probably took no more than a couple of days, then the fun starts.
                First problem is that the top section of the conning tower is non existent, not included in the kit and not shown on the instructions so a scratch built one was produced out of some scrap PE 0.004" thick.
                Although it doesn't really matter, the instructions are a mirror image of the model!
          There are no railings included in the kit. Looking at lot of pictures, there definitely were railings fitted but may have been taken down at sea. The other thing is that the stanchions were a long way apart.
             By fair means and foul, I've come up with a figure of 15mm between stanchions.
       Some scratch-building will be in order, so we need a plan.
Haddock.     



     
               
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 19, 2021, 10:51:06 AM
Looks like the plan has worked up to now.
Haddock.
There's a shot of some railings to show the distance apart of the stanchions, poor pic but best I can find.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: chriswil42 on February 19, 2021, 12:58:53 PM
Looking good Tony. Between you and Kevin there's going to be a whole fleet of subs.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: zak on February 19, 2021, 01:17:32 PM
Looking good Tony. Between you and Kevin there's going to be a whole fleet of subs.
It could be a SUB - division of the club.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: councilman on February 19, 2021, 02:06:47 PM
Never knew this Sub existed. Real interesting stuff.
Thanks Haddock.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: councilman on February 19, 2021, 02:07:17 PM
Looking good Tony. Between you and Kevin there's going to be a whole fleet of subs.
It could be a SUB - division of the club.
SUB standard joke.   ::)
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: zak on February 19, 2021, 02:32:07 PM
Looking good Tony. Between you and Kevin there's going to be a whole fleet of subs.
It could be a SUB - division of the club.
SUB standard joke.   ::)
Quick change the SUBject!
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: MSea on February 19, 2021, 02:57:57 PM
With the amount of subs you 2 have - it will need a SUBstantial  table to hold them all
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: zak on February 19, 2021, 05:35:14 PM
With the amount of subs you 2 have - it will need a SUBstantial  table to hold them all
[/quote
Always excellent, never Substandard
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: cph64 on February 22, 2021, 04:53:45 PM
SUBsequently we'll move on. I know you said it was long but it looks so long in the photos, bet it was unstable.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Bigkev on February 22, 2021, 08:04:31 PM
Hi All,
From the 'SUBS' bench, it really looks an interesting beast.
I still cannot get my head around the fact that this was in main steam powered and need to be sealed before submerging.
Those guys who designed this were either geniuses or obsessed.
Cheers,
Bigkev
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 23, 2021, 08:16:12 AM
Hi All,
From the 'SUBS' bench, it really looks an interesting beast.
I still cannot get my head around the fact that this was in main steam powered and need to be sealed before submerging.
Those guys who designed this were either geniuses or obsessed.
Cheers,
Bigkev
They can't ever have been to sea!!
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: MSea on February 23, 2021, 08:37:48 AM
Like a lot of things - it sounded good on paper - and the designer NEVER HAD TO USE THE PRODUCT  >:( >:( >:( >:( >:( >:(
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 23, 2021, 01:18:44 PM
Stanchions added, primer sloshed on.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Red Lancer on February 23, 2021, 06:09:08 PM
Looks good and he stanchions are excellent.
did it only take a week from box to built?
I'm doing something wrong
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: councilman on February 23, 2021, 06:15:23 PM
Like a lot of things - it sounded good on paper - and the designer NEVER HAD TO USE THE PRODUCT  >:( >:( >:( >:( >:( >:(
A Yorkshireman would have said... If its that B....Y good, you take the dam thing for a swim!
Looking good Mr Haddock.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 24, 2021, 08:07:29 AM
Looks good and he stanchions are excellent.
did it only take a week from box to built?
I'm doing something wrong
Probably less, I'm doing bits at in between other stuff.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 26, 2021, 04:05:09 PM
Paint added. Bit and bobs and railings needed to finish.
Haddock.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: zak on February 26, 2021, 05:36:03 PM
Are they twin funnels?
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on February 27, 2021, 09:07:44 AM
Are they twin funnels?
Yup, they had to be taken down and sealed from the sea before diving!
Haddock.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: councilman on February 28, 2021, 04:16:09 PM
That must have taken some time.
Sounds more like a Steam Punk machine.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on March 01, 2021, 08:33:59 AM
That must have taken some time.
Sounds more like a Steam Punk machine.
Reportedly 30 mins to dive!
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: MSea on March 01, 2021, 09:57:31 AM
30 mins to dive BUT the engine room was still very very very hot  - even thou the engine was shut down it still gave off lots of heat as it was cooling down - who would want to be an engineer on that ship.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: chriswil42 on March 01, 2021, 12:30:24 PM
30 mins to dive BUT the engine room was still very very very hot  - even thou the engine was shut down it still gave off lots of heat as it was cooling down - who would want to be an engineer on that ship.
...boat.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Red Lancer on March 01, 2021, 06:36:02 PM
All these Subs are getting to me! I think they all look great!
I could get interested in doing some if I was 20 years younger!
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Bob C on March 01, 2021, 08:01:35 PM
Looks great.

Bob c
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on March 03, 2021, 04:40:17 PM
Guess that's it folks, ugly looking thing innit!
Haddock.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: zak on March 03, 2021, 05:33:50 PM
Guess that's it folks, ugly looking thing innit!
Haddock.
Lovely, but some sea needed.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: chriswil42 on March 04, 2021, 02:15:22 PM
I presume the masts were also taken down when it dived?
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Haddock on March 05, 2021, 08:00:09 AM
Think so, it looks as though they could have telescoped into the hull.
Haddock.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: cph64 on March 05, 2021, 05:17:41 PM
Another masterpiece.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Red Lancer on March 09, 2021, 10:39:28 AM
Great stuff!
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: councilman on March 12, 2021, 03:33:39 PM
Cracking subject, Cracking model.
Superb.
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Bigkev on March 13, 2021, 06:20:40 PM
Beautiful work Haddock, as always.
Bigkev
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Red Lancer on March 19, 2021, 06:11:01 PM
Guess that's it folks, ugly looking thing innit!
Haddock.
Lovely, but some sea needed.
Maybe you submarine Guys should get together and mount one submerged! There's a thought!
Maybe nosing through a tethered minefield? ..
Title: Re: BRITISH K2 SUBMARINE IN 1:350 BY MICRO-MIR
Post by: Bigkev on March 19, 2021, 09:01:30 PM
Guess that's it folks, ugly looking thing innit!
Haddock.
Lovely, but some sea needed.
Maybe you submarine Guys should get together and mount one submerged! There's a thought!
Maybe nosing through a tethered minefield? ..

By tethered Minefield, do you mean negotiating, all those modellers at a model show, intent on on a bargain, but less on a shower or personal hygiene??

Cheers,
Bigkev